Flux Powder Cored Wire Machine

1SANSO machinery is the leader in roll formed Flux-Cored Welding Wire production line. The core equipment is the Roll Forming Mill, which transforms flat strip steel and flux powder into welding wire. SANSO machinery offers one standard machine the SS-10, which makes wire with diameter 13.5±0.5mm and thickness1.0mm

The Flux Feeder is closely allied to the Roll Form Mill - this accurately dispenses the powder fill into the center of the wire as it is being made on the Roll Forming Mill.

The SS-10 flux-Cored Welding Wire production line

1.Uncoiler

2.Shear and end welder

3.Cage Accumulator

4.Forming and sizing machine

5.Flux Feeder

6.HF welder

7.Rewinder

The application of flux-cored wire ( flux powder):

metal casting industry

The Core material composition( flux powder) :

	CHEMICAL COMPOSITION（%）
No.	Mg	Re	Ca	Si	AL	Ba	Sb	Fe
1	15-20	0.5-4	2-5	43-48	≤1.0	appropriate amount		balance
2	20-24	1-4	2-5	43-48	≤1.0	appropriate amount		balance
3	24-28	1-4	1-5	43-48	≤1.0	appropriate amount		balance
4	28-32	1-5	2-5	43-48	≤1.0	appropriate amount		balance
5	22-26	1-5	2-5	35-44	≤1.5	appropriate amount	2-5	balance
6	26-32	1-5	2-5	35-44	≤1.5	appropriate amount	2-5	balance
7	4-13	7-15	1-5	42-46	≤1.0	appropriate amount		balance
8			0.5-2.5	68-72	≤2.0	4-8		balance

The specification of flux-cored wire

Diameter : 13.5±0.5mm

Thickness1.0mm

The width of flux cored wire coil:600mm

The weight flux cored wire coil :1-1.3Ton

<trp-post-container data-trp-post-id='940'>Flux Powder Cored Wire Machine</trp-post-container>

SS-11 SOLID CALCIUN CORED WIRE PRODUCTION LINE

The SS-11 Roll forming mill shape the steel strip into the round wire, at the forming section , the Calcium wire is fed into the round wire at the vertical roller cluster idle and then the wire is welded .finally the Solid calcium cored wire is wound by the rewinder

APPLICATION

Calcium cored wire is used in steel making, which can purify the form of steel inclusions and improve the castability of molten steel and significantly increase the yield of ferroalloy, reduce alloy consumption, reduce steelmaking cost, and improve economic benefits.

The specification of Solid calcium cored wire

1.Diameter:9.5±5mm---10.5±0.5mm

2.Thickness :1.0--1.5mm

3.The weight cored wire coil :1Ton

Solid calcium cored wire production line